Leak detection
& repair
Water where it shouldn't be, found without opening what doesn't need opening. We use acoustic and thermal locating and meter tests, and fix slab and crawlspace leaks on the same visit when the part's on the truck.
What's included
In the scope,
not the small print.
- Whole-house meter test to prove the leak
- Acoustic listening on supply lines
- Thermal camera on slabs and walls
- Dye test on every toilet
- Pressure at the main and at the fixture
- Pinpoint mark on the floor or wall before we cut
- Repair with the same material as the line
- Pressure re-test and a photo record
How it runs
Step by step.
- Minute 0
You call
We ask three questions and tell you whether to shut the main.
- Minute 60
On site
Meter test first. If the meter moves with everything off, it's real.
- Hour 1–2
Locate
Acoustic on supply, thermal on slab, camera on drains. We mark the spot.
- Hour 2–4
Repair
Most repairs the same visit. Slab leaks get a reroute option explained.
- Before we leave
Re-test
Pressure held, floor dry, photos in your inbox.
Questions
Straight answers.
Will you have to break the slab?
Often not. A reroute through the attic or wall is usually cleaner than cutting concrete, and we show you both before deciding.
How do you know it's a leak and not condensation?
The meter test. If everything is off and the meter is still turning, that's water leaving the system.
Do you fix it the same day?
On copper, PEX and most fittings, yes. Specialty valves may need a part run.